Häfele 533.23.320, Руководство пользователя

Страница: 24 / 64

EN21
Cleaning your dishwasher is important to
maintain the machine’s service life
Make sure that the water softening
setting (If available) is done correctly and
correct amount of detergent is used to
prevent limescale accumulation. Refill
the salt compartment when the salt
sensor light comes on.
Oil and limescale may build up in your
Dishwasher over time. If this occurs:
Fill the detergent compartment but
do not load any dishes. Select a pro-
gramme which runs at high temperature
and run the Dishwasher empty. If this
does not clean your Dishwasher suffi-
ciently, use a cleaning agent designed
for use with dishwashers.
To extend the life of your dishwasher,
clean the appliance regularly on each
month
Wipe the door seals regularly with a
damp cloth to remove any accumulated
residue or foreign objects.
8.1. Filters
Clean the filters and spray arms at least
once a week. If any food waste remains
or foreign objects on the coarse and
fine filters, remove them and clean them
thoroughly with water.
a) Micro Filter b) Coarse Filter
c) Metal Filter
8. CLEANING AND
MAINTENANCE
1 2
a
c
b
To remove and clean the filter combi-
nation, turn it counter clockwise and
remove it by lifting it upwards (1).Pull the
coarse filter out of the micro filter (2).
Then pull and remove the metal filter (3).
Rinse the filter with lots of water until it is
free of residue. Reassemble the filters.
Replace the filter insert, and
rotate it clockwise (4).
Never use your dishwasher without
a filter.
Incorrect fitting of the filter will
reduce the washing effectiveness.
Clean filters are necessary for
proper running of the machine.
8.2. Spray arms
Make sure that the spray holes are not
clogged and that no food waste or
foreign object is stuck to the spray arms.
If there is any clogging,remove the spray
arms and clean them under water. To
remove the upper spray arm undo the
nut holding it in position by turning it
clockwise and pulling it downwards.
Make sure that the nut is properly tight-
ened when refitting the upper spray arm