Häfele 533.23.320, Руководство пользователя

Страница: 9 / 64

EN6
2. INSTALLATION
2.1. Machine positioning
When positioning the machine, place it in an
area where dishes can be easily loaded and
unloaded. Do not put the machine in an area
where the ambient temperature falls below
0
O
C.
Read all warnings located on the
packaging before removing the
packaging and positioning the machine.
Place the machine close to a water tap and
drain. Take into consideration that the
connections will not be altered once the
machine is in position.
Do not hold the machine by its door or panel.
Leave an adequate distance around the
machine to allow ease of movement when
cleaning.
Ensure the water inlet and outlet hoses are
not squeezed or trapped and that the
machine does not stand
on the electrical cable while positioning.
Adjust the feet so the machine is level and
balanced. The machine should be placed
on flat ground otherwise it will be unstable
and the door of the machine will not close
properly.
2.2. Water connection
We recommend fitting a filter to your water
inlet supply in order to prevent damage to
your machine due to contamination (sand,
rust, etc.) from indoor plumbing. This will also
help prevent yellowing and deposit formation
after washing.
Note printing on the water inlet hose
If models are marked with 25 C, the water
temperature may be max. 25 C (cold water).
For all other models:
Cold water preferred; hot water max. tem-
perature 60 C.
2.3. Water inlet hose
WARNING : Use the new water inlet hose
supplied with your machine, do not use an old
machine’s hose.
WARNING: Run water through the
new hose before connecting.
WARNING : Connect the hose directly to
the water inlet tap. The pressure supplied by
the tap should be a minimum of 0.03 MPa and
a maximum of 1 MPa. If the pressure exceeds
1 MPa, a pressure relief valve must be fitted
between the connection.
WARNING : After the connections are
made, turn the tap on fully and check for
water leaks. Always turn off the
water inlet tap after a wash program has
finished.
An Aquastop water spout is available with
some models. Do not damage it or allow it to
become kinked or twisted.
Connect the water drain hose directly to
water drain hole or to the sink outlet spigot.
This connection should be minimum 50 cm
and maximum 110 cm from flor plane.
IMPORTANT : Items will not wash properly if
a drain hose longer than 4 m is used.
2.4. Drain Hose
o
o
o