Install the coolant tank
Orient the coolant pump (X) towards the rear opening of
machine stand.
Place the coolant tank (1A) onto the coolant platform
(H). The coolant tank (1A) contains a divider that forms
a trough in the bottom of the tank. This trough fit over
the vertical lip of the coolant platform (H).
Insert one end of the 0.5 drain hose (Y) onto the hose
connector (1B) on the underside of the machine base.
Place the other end into the insert (Z) of the coolant tank
(1A).
Attach the rear plate to the back of the stand.
Place rear plate (1C) across the back of the machine
stand.
Align the plate holes (1D) with the set of 4 holes towards
the top of the machine stand.
Apply an M8 washer to each of 4 M8x25 screws.
Secure with 4 screws and washers.
Install the splash plates
Insert a splash plate (1E) onto the front sidewall of
machine base.
Align the 2 slots (1F) in the base of the splash plate with
the matching screw holes on the machine base.
Apply a washer for each of 2 hex socket head screws
M8x20.
Loosely screw the socket hex head screws into the
aligned slot (1F) and holes.
Adjust the splash plate (1E) to the proper position and
tighten down the screws to secure.
Insert a longer one of splash plate (1G) onto the rear
sidewall of the machine base. This plate need not be
secured with screws to allow free movement or
convenient removal.
7
7
R
R
E
E
C
C
O
O
M
M
M
M
E
E
N
N
D
D
A
A
T
T
I
I
O
O
N
N
S
S
A
A
N
N
D
D
A
A
D
D
V
V
I
I
C
C
E
E
13
14
1A
X
Z
Y
14
H
1B
1C
Y
1D
1D
1E
1F
1G
Page 9
Instruction Manual for CS-315D (S828)
03/12/2014