Hafco BP-430, Инструкция по эксплуатации

Страница: 5 / 32

2. WARNINGS
−
Misuse of this machine can cause ser
−
For safety, machine must be set up, use
properly.
−
Read, understand and follow instructions
parts manual which was shipped with yo
When setting up machine:
−
Always avoid using machine is damp o
areas.
−
Always be sure machine is securely an
−
Always keep machine guards in place.
−
Always put start switch in "OFF" posit
machine.
When using machine:
−
Never operate with machine guards m
−
Always wear safety glasses with side s
−
Never wear loose clothing or jewelry.
−
Never overreach - you may slip and fa
MAHINERY GENERA L SA
1. Always wear protective eye wear when
Eye wear shall be impact resistant, prote
with side shields. Not using eye wear wh
severe injury from breakage of eye prote
2. Wear proper apparel. No loose clothing o
get caught in moving parts. Rubber sol
recommended for best footing.
3. Do not overreach. Failure to maintain p
can cause you to fall into the machine or
get caught - pulling you into the machin
4. Keep guards in place and in proper wo
operate the machine with guards remo
5. Avoid dangerous working environment
stationary machine tools in wet or damp
areas clean and well lit. Special electric
working on flammable materials.
6. Avoid accidental starts by being sure th
"OFF" before plugging in the machine.
7. Never leave the machine running while u
Machine shall be shut off whenever it is n
8. Disconnect electrical power before servicin
accessories or general maintenance is done
electrical power to the machine must be di
is done.
Ϯ
rious injury.
ed and serviced
s in the operator and
ur machine.
or poorly lighted work
nchored to the floor.
tion before plugging in
missing.
shields.
.
all into the machine.
−
Never leave machine ru
−
Always shut off the mac
When servicing machine:
−
Always unplug machine
servicing.
−
Always follow instructio
when changing accessor
You - the stationary power to
Read and follow these
full benefits from your machin
among the best in design and
used improperly can be render
absolutely mandatory that tho
properly trained in how to use
understand the Operators and
affixed to the machine. Failure
can cause serious injuries
AFETY WARNINGS
operating machinery.
ective safety glasses
hich could result in
ection.
or jewelry which can
ed footwear is
proper working position
r cause your clothing to
ne.
rking order. Do not
ved.
ts. Do not use
locations. Keep work
cs should be used when
he start switch is
unattended.
not in operation.
ng. Whenever changing
e on the machine,
sconnected before work
9.
Maintain all machine tool
maintenance instructions
of accessories. No attemp
have makeshift repairs do
voids the warranty but als
10. Machinery must be ancho
11. Secure work. Use clamps
practical. It is safer than
hands to operate the mac
12. Never brush away chips w
13. Keep work area clean. Clut
14. Remove adjusting keys an
machine on.
15. Use the right tool. Don't
job it was not designed fo
16. Use only recommended acc
manufacturer’s instructio
17. Keep hands in sight and c
cutting surfaces.
18. All visitors should be kep
area. Make workshop com
master switches, or by rem
19. Know the tool you are us
and potential hazard.
unning while you are away from it.
chine when not in use.
from electrical power while
ons in operators and parts manual
ry tools or parts.
ool user - hold the key to safety.
simple rules for best results and
ne. Use properly, this machine is
safety. However, any machine
red inefficient and unsafe. It is
ose who use our products be
them correctly. Should read and
d Parts Manual as well as all labels
e in following of these warnings
ls with care. Follow all
for lubricating and the changing
pt shall be made to modify or
one to the machine. This not only
so renders the machine unsafe.
ored to the floor.
or a vise to hold work, when
using your hands and it frees both
chine.
while the machine is in operation.
ttered area invite accidents.
nd wrenches before turning
force a tool or attachment to do a
or.
cessories and follow
ons pertaining to them.
clear of all moving parts and
pt at a safe distance from the work
mpletely safe by using padlocks,
moving starter keys.
sing – its application limitations,
2
04/11/2019 Instructions Manual for BP-430 (W433) 5