Haes ESPRIT-G, Инструкция по установке, пусконаладке и эксплуатации

Страница: 48 / 88

ESPRIT Gas Extinguishing User Manual CONFIGURING THE PANEL
48
Approved Document Ref: UI-ESG-01 Issue 2.0
26: EXT-OP: ENABLED / DISABLED
27: MAN RELEASE INPUT: ENABLED / DISABLED
28: FLOW SWITCH INPUT: ENABLED / DISABLED
29: LOW PRESSURE INPUT: ENABLED / DISABLED
30: HOLD INPUT: ENABLED / DISABLED
31: ABORT INPUT: ENABLED / DISABLED
32: AUTO MAN INPUT: ENABLED / DISABLED
33: LOCAL FIRE Relay: ENABLED / DISABLED
•
Use the Up/Down arrow keys to navigate between options.
•
Press
✓
key to toggle between ENABLED or DISABLED .
Note: If any of these options are set to DISABLED , the amber Disablement LED will be
illuminated as steady. If the SOUNDERS option is set to DISABLED , the amber Sounder
Status LED will also be illuminated.
•
When finished, press return key to accept the changes and return to DISABLE menu. A
short acknowledgement sound will be present.
•
Press the return key to return to User menu.
User Menu: Time & Date
The Time&Date and Set DST sub-menus are used to set the system clock and the local Daylight
Savings Time:
Time&Date Menu: Time&Date
To set the system Time&Date:
•
On the Main Menu , use Left/Right arrow keys to move cursor box to User menu
•
Press
✓
key to select the User menu.
•
Under User menu highlight the Time&Date option and press
✓
key to select it.
•
On the User Time&Date sub-menu, highlight the Time&Date option and press
✓
key to
access it.
•
Adjust the time and date as required, using the Up/Down and Left/Right arrow keys.
•
Press return key once to return to Time&Date menu.
Time & Date Menu: Set DST
To set the start and end of local Daylight Savings Time on the system:
•
On the Main Menu , use Left/Right arrow keys to move cursor box to User menu
•
Press
✓
key to select the User menu.
•
Under User menu highlight the Time&Date option and press
✓
key to select it.
•
On the User Time&Date sub-menu, highlight Set DST option and press
✓
key to access it.