Haes ESPRIT-G, Инструкция по установке, пусконаладке и эксплуатации

Страница: 46 / 88

ESPRIT Gas Extinguishing User Manual CONFIGURING THE PANEL
46
Approved Document Ref: UI-ESG-01 Issue 2.0
User Menu
Accessible from the Main Menu (Access level 2), the User menu and its subsequent sub-menus, are
used to set-up the panel ready for configuration. The sub-menus available are:
•
User
o
AUTO/MANUAL MODE
o
DISABLE
o
SET TIME & DATE
▪
Time & Date
▪
Set DST
o
LAMP TEST
o
CONTRAST
o
BUZZER
To access the Main Menu:
•
Turn Activate Controls key to On
or
•
Use the keypad to enter code 1111 :
o
Press
✓
button
o
Use up/down arrow keys to increase/decrease the number value
o
Use left/right arrow keys to move to the next digit in the four-digit sequence
o
When all four digits are set to the code 1111, press
✓
button
o
The Main Menu will become available for operation.
Note: Access level 2 Menu will deactivate after 30 sec if not used.
User Menu: AUTO/MANUAL MODE Menu
Used to select the operational mode between Auto/Manual mode and Manual Only mode (as an
alternative to using the Select Mode key switch):
•
From the Main Menu , use left/right arrow keys to move curser box to User menu icon.
•
Press
✓
button to select the User menu.
•
Under User Menu , use left/right arrow keys to move curser to the AUTO MAN sub-menu icon.
Press
✓
button to open the AUTO/MANUAL MODE Menu :
AREA ONE: AREA TWO:
AUTO MANUAL AUTO MANUAL
•
The cursor will indicate current setting (AUTO or MANUAL).
•
Use left/right arrow keys to move curser to required setting and then press
✓
button.
•
Press return key when setting is completed.