Haemonetics LN9000-110-EWC Скачать руководство пользователя | Manualshive

Страница: 107 / 110

background image

Consulting Reference Information

8-7

P/N 85213-30, Manual revision: B

IEC 60601-1-2

STANDARD

REQUIREMENTS

Operation
precautions

Caution: The Haemonetics device must be operated in an environment compat-
ible to the requirements of the IEC 60601-1-2 Standard, Electromagnetic compat-
ibility.

To comply with the IEC 60601-1 collateral standards for medical electrical equip-
ment, general requirements for safety, do not connect more than one multiple
portable socket outlet or extension cord to the system. In addition, do not power
the MCS+ device using a power cord other than the one originally supplied by
Haemonetics for your instrument. Always ensure the power cord is connected to
an appropriately grounded power source.

Mobile RF communication equipment not approved by Haemonetics and porta-
ble communication equipment can affect the system. Any accessories and cables
not approved by Haemonetics used in conjunction with the device may increase
hazards and influence compatibility with EMC requirements. Therefore, non-ap-
proved accessories and cables must not be used.

In addition, the Haemonetics device and accessories must not be placed directly
adjacent to, or top of other equipment, unless specifically approved by Haemon-
etics.

Electromagnetic
immunity

The Haemonetics system is intended for use in the electromagnetic environment
specified in the following tables and the operator must ensure that each system
is used in such an environment.

IEC 60601-1-2, Table 201: Guidance and manufacturer’s declaration - electromagnetic immunity

Emissions test

Compliance

Electromagnetic environment guidance

RF emissions
CSIPR 11

Group 1

The Haemonetics system uses RF energy only
for its internal functions. Therefore, its RF emis-
sions are very low and are not likely to cause
any interference in nearby electronic equip-
ment.

RF emissions
CSIPR 11

Class B

The Haemonetics system is suitable for use in all
establishments including domestic establish-
ment and those directly connected to the public
low-voltage power supply network that supplies
buildings used for domestic purposes.

Harmonic emissions
IEC 61000-3-2

Class A

Voltage fluctuations/flicker emis-
sions
IEC 61000-3-3

Complies

«
...
105
106
107
108
109
...
»

Содержание LN9000-110-EWC















































































































Отзывы:

Нет отзывов

Похожие инструкции для LN9000-110-EWC

Бренд: NARGESA Страницы: 50

Бренд: Zenbooth Страницы: 60

ABS-Lock DH04 Series

Бренд: ABS Страницы: 4

Бренд: Nautilus Страницы: 12

Бренд: CAIRE Страницы: 16

Бренд: DBX Bushido Страницы: 12

Бренд: Ognibene Страницы: 28

Бренд: Hameg Страницы: 24

Бренд: Vaisala Страницы: 118

Бренд: Tascam Страницы: 8

Бренд: Labelmate Страницы: 61

Бренд: Labconco Страницы: 62

ENET-232 Series

Бренд: National Instruments Страницы: 105

Бренд: Daekyung Страницы: 15

Бренд: Meritor Страницы: 65

Бренд: ATD Tools Страницы: 7

SPLICE-500 MKII

Бренд: Serpent Страницы: 8

Бренд: Wecan Technology and Lighting Co., Ltd Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды