Haemonetics Cell Saver Elite+ Скачать руководство пользователя страница 22

Страница: 22 / 24

This guide is not intended as a substitute for the Cell Saver

Elite

+ System Operation Manual or authorized training.

TRN-QRG-100125-US(AC)

Procedure Records

The Records screen displays information about the consumables, procedures and device and allows you to enter additional
information and export it to an external storage device.

NOTE:

The barcode reader is active when the device is in the Records screen.

1. Touch

Records

from the drop-down list.

2. If you want to view all procedures, select history, then select the desired procedure and press

"view"

You can access procedures, events and device records.

Consumables

Includes list number, lot number, and expiration date for disposables and solutions

Procedure

Includes procedure volumes, times, surgery type, surgeon, operator ID, and patient ID

Device

Includes software versions and device serial number

3. Touch

Edit

to edit the record.

NOTE:

Consumable information, operator ID, and patient ID can be scanned using the barcode reader or entered manually.

NOTE:

Device records are automatically populated.

4. To export procedure records, connect an external storage device, touch

Export

, and select desired export option.

Содержание Cell Saver Elite+

























Результаты поиска

Содержание Cell Saver Elite+

Отзывы:

Похожие инструкции для Cell Saver Elite+

Бренды по названию

Популярные бренды

Haemonetics Cell Saver Elite+, Краткое руководство пользователя

Результаты поиска

Содержание Cell Saver Elite+

Отзывы:

Похожие инструкции для Cell Saver Elite+

Бренды по названию

Популярные бренды