HAEGER Aquaclean PRO, Инструкция пользователя

Страница: 17 / 88

- 15 -
Disassembling the accessories
•
Pull the hose out of the tank suction mouth.
•
Press the union on the bypass adapter located on the motor body and turn it counter
clockwise (left) and remove it.
•
Pull out the hose kit from the wheeled base and motor housing.
•
Remove the cap on the trigger adapter located on the hose handle with the water
pumping trigger by pressing it and turning it counter clockwise (to the left).
•
If you have used the seat and floor washing apparatus, press the cap on the trigger
adapter on the hose handle with the water pumping trigger and turn it counter
clockwise (left) to remove it.
•
Pull the thin water hose out of the water hose channels on the pipes.
•
Pull out the pipes and apparatus.
Cleaning and Maintenance
Drain and clean the water inside the tank after each use of
your appliance, as it will damage the metal parts of the
engine over time. If you leave water in the tank, a bad smell
will occur.
Do not wash the engine body, do not immerse it in water,
just wipe it clean.
You can wipe or wash the accessories.
After vacuuming the liquid, dry the pipes, hose and engine
part. Run the vacuum cleaner for a few minutes after the
tank is also emptied and dried. In this way, particles will
remain in the pipe and hose group and the formation of
bad odours will be prevented.
Replace the dust bag with a new one every time it is full.
Shake off the cloth dust bag.
The diverter exhaust must be cleaned as it gets dirty so that
the suction power does not decrease. You can remove and
wash the tank intermediate body filter and motor filter as
they become dirty.