Megapixel IP Camera User manual V2.0.0
36
administrator without any limit; Operator can change configuration information but
can’t view device status information; Viewer has instead permission of operator. User
status is to set the effectiveness of user, when enable, the added user can login
successfully, or can’t login.
6.1.2 Modify user
When need modify the information of a user, we can use the function of modify user.
When modify user information, the username can’t be modified.
Figure 6.3 modify user
In the user list, click the modified user, the user information will show below, then
select “Modify User”. The username displays gray, can’t be modified. You can modify
others information, after modified, click the button of “Save”, then user information
modified successfully.
6.1.3 Delete user
When a user no longer use, we can delete it. Select “Delete User”, you can achieve
this function. It should be noticed that when delete user, you can’t delete the user that
are logging, that is to say, you can’t delete yourself.
Figure 6.4 delete user
In the user list, click the user that needs to be deleted, the user information will show
below, then select “Delete user”. Click the button of “Save”, the user will be deleted.
Deleted user will no longer show in user list, and can’t use its username and password
login device.
Megapixel IP Camera User manual V2.0.0
37
6.2 Time Setup
There are two types of update mode in this system. One is “Manual”, another is “NTP
Server”.
NTP server is a protocol that syncs the time of device. It can make device
synchronization with the server or clock source, which can provide high precision
time correction. Select “NTP Server”, right set the device’s time zone, the IP address
of NTP server, the port of NTP server, random set “Refresh Time”, after saved device
will with the function of time synchronization. It should be noticed that, the default
configuration of NTP Synchronization is use network to achieve this function, so you
must ensure the device can connect to internet first.
Figure 6.5 the interface of NTP time setting
Manual is means that enter year, month, day, hour, minute, second and saved, then the
device’s time is manually entered time. When select “Manual”, there is a function
named “Synchronize with the Local Time”, select it will make the device time
syncing your PC time.
Figure 6.6 the interface of manual time setting
6.3 Log Setup
Log is operation record during device is running. The output log type that device
supports are “Debug”, “Run”, “Error”, “Operation”, “Alarm”, “Statistic” and
“Common”, you can select according to actual needing.
Save day means a log file can save for how many days, once set, when the log file
saved bigger than this value, it will be deleted.
Storage strategy is to select when the storage space is full, device deletes the oldest
log file or stops record new log file.
Auto backup is to set when device deletes a log file, send this log file to FTP or SMTP,
achieve this function need you had right configured parameters of FTP or SMTP.
