4
Safety Instructions
For safety reasons wear goggles during the
treatment.
When working with materials, which might
create dust or moisture, use a drilling unit with
suction or spray technique. Wear a nose and
mouth protection. Always follow the safety
instructions, provided by the manufacturer of
the materials being formed and used.
Switch off the unit immediately if
•
the bur comes off during the treatment itself,
•
the motor blocks during the treatment.
Turn on the unit only when you hold the
handpiece safely in your hand or if it is placed
in the handpiece holder. Ensure that the
patient’s foot and the handpiece are held firmly
in place during the operation.
To prevent injury, work with extreme caution
on the foot of the patient, and use only light
pressure.
To ensure that the bur/tool sits firmly in the
chuck, do not work with tools which
•
have an oily shaft,
•
are worn,
•
are bent.
For safety reasons do not change the tool
while the motor is running.
