5
Safety Instructions
Turn off the unit after work.
Never clean the handpiece while motor is
running.
Before using the equipment, make sure that
•
the tool can be pushed far enough into the
chuck (test this with a dipstick and clean the
handpiece, if necessary),
•
the inserted tool sits properly in the chuck
and will not cant/jam while clamping it,
•
the tool is approved for using it at the max
speed (see manufacturer
’
s instructions), or
•
only use the speed required by the
instrument,
•
the tool is absolutely dry.
After each use and before each new customer:
•
The tools are to be cleaned, disinfected and
sterilized. Caution! Handpiece and motor
may not be sterilized.
•
All surfaces of the handpiece are
disinfected. Take care that no liquids enter
the handpiece.
Always follow the operating instructions. Do
not carry out any repairs, modifications or
maintenance work yourself. This is only to be
accomplished by an authorized specialist. The
mains cable may also only be changed by the
