HADEF 20/94AF-EX, Инструкция по установке, эксплуатации и обслуживанию

Страница: 6 / 18

6
5.52.692.01.01.06

The lifting tackle or the load must be securely attached to the hook and be seated at the bottom of the
hook.

The safety catch of hooks must be closed.

When charged, the housing may not be in contact somewhere.
DANGER!
Special safety measures for use in areas prone to explosion.

No use in zone 0 or zone 20

Not to be used with IIC gases and IIB gases hydrogen sulphide, ethylene oxide and light metal and shock
sensitive dusts!

No use in temperature class T5 or T6.

It is not allowed to use the equipment in area at risk from explosion where gas AND dust does both exist
at the same time!

During assembly and operation of explosion-proof equipment, the relevant regulations of i.e. BG-Chemie
about the use of equipment in area at risk from explosion, must be adhered to by the user/owner.

Please make sure that external ventilation is sufficient.

Please wear conductive shoes. Gloves should have a shunt resistance of < 10
8

.

It is not allowed to take off clothes.

The surface temperature of the devices could increase by a variety of external circumstances. For this
reason, the surface temperature is to be monitored.

Avoid ignitable dust deposits.

Remove dust deposits daily before commencing work and ensure that dust cannot settle between moving
parts.

Never remove dust with compressed air - remove it with a wet bolt of cloth.

Defective units or units that show abrasion of its surface rust on chains, hooks, or suspension devices,
must be taken out of service.

Please observe the prescribed intervals.

Assembly and maintenance work must only be carried out in an atmosphere not prone to explosion.

Check the grease level of the bearings regularly

Exchange friction surfaces in time and (an exception to this are electric units - maintenance of the brakes
must only be effected by HADEF).

Protect the device from impact, friction, rough handling and moisture.
DANGER!
The operator is responsible for professional equipotential bonding (earthing) for power-operated
devices!
Special scope
Use of different EX-zones is depended from the EX-classification of the unit. Find the EX-classification on its
type plate.
Unit classified
in EX-classification
No use
in EX-zone
3G 0,20,1,21,22
3D 0,20,1,21,2
2G 0,20,21,22
2D 0,20,1,2