Hadeco Smartdop 30EX, Руководство по эксплуатации

Страница: 15 / 72

Smartdop
®
30EX
Basic Operation
3. CONTROLS
3-3 RIGHT REAR VIEW
& PROBE
1) ROLL SHAFT
To hold the paper roll in the printer.
2) COMMUNICATION
To connect the Doppler to a computer.
PORT
3) PROBE CONNECTOR 1
To connect probe 1.
4) PROBE CONNECTOR 2
To connect probe 2. Use when connecting PPG or
additional probes.
5) AC ADAPTOR
To connect the designated AC adaptor.
CONNECTOR
6) POWER SWITCH
To turn the unit ON/OFF.
7) HEADSET
To connect a headset (not provided). Cuts off sound
to the speaker.
8) PROBE
Multi-probe selection: 5, 8 and 10 MHz.
9) PROBE BUTTON
To freeze / unfreeze the waveform.
To activate / deactivate the printer.
To activate / deactivate the cuff inflator.
The probe button function is set in M
enu mode under PRB-KEY.
See 5-3-15 “OTHERS-PRB-KEY” for details.
10) PROBE CAP
To protect the probe transducer tip when not in use.
8
ON OFF