7
8
9
10
Fit the metal fitting holder
041-02
being careful not to move the
fittings on the landing gear cover
041-04
.
Fix in place with 1 x
041-10
screw.
Peel the backing off the liner
041-12
and position on the shock absorber
041-01
in the position shown.
Spread the metal fittings attached to the centre of the landing gear cover
041-04
and fit them into the holes on the shock absorber
041-01.
Next, fit the metal fittings attached to the end of the landing gear cover
041-04
into the grooves on the shaft holder
041-05
.
NOTE
The main landing gear is out. The
landing gear position indicator
041-09
also pops out.
NOTE
When the shock absorber
041-01
is
rotated 90 degrees, the landing gear
position indicator
041-09
is pulled in.
Directly below
Popped out position
90° to the side
041-04
041-02
041-10
STAGE COMPLETE
組み立てガイド
組み立てガイド
19
AGORA
MODELS