Hach TitraLab KF1000 Series, Руководство пользователя, Страница: 62 / 68

Table 21 Electrode
Parameter Description Basic mode Expert mode
Type Type of measurement electrode
Part of name Part of the name used to identify matching electrodes if the
preferred electrode is not connected
Recommended electrode Recommended electrode to be used for this analysis x
Working mode Specify if the probe is used in imposed voltage/current (AC or DC) x
Current (sample analysis) Set the value of the imposed current during sample analysis x
Current (titrant calibration) Set the value of the imposed current during titrant calibration x
Table 22 Titrant
Parameter Description Basic mode Expert mode
Name Name of the titrant x
Titrant concentration Nominal concentration of the titrant x
Resolution Number of decimals of the nominal concentration of the titrant x
Real concentration Real concentration of the titrant used for result calculation x x
Resolution Number of decimals of the real concentration of the titrant x
Titrant calibration
Active Select No to skip this method during titrant calibration x x
Calibration frequency Recommended frequency of titrant calibration (0 = no reminder) x x
Stirring speed Speed of the stirrer during titrant calibration x x
Incremental addition
Delay Stirring time before the titration starts x x
Injection autodetect Automatic start after the detection of the sample injection x x
End point Ordinate of the end point x
Proportional band Proportional band of the PID regulation x
Drift threshold Drift value below which the cell is considered as dry x x
Max. addition speed Maximum speed for titrant addition on titration regulation x
Min. titr. duration Set the minimum titration duration x x
Max. titr. duration Set the maximum titration duration x x
Titration calculation
Resolution Maximum number of decimals to show for the real concentration of the
titrant x
Titrant cal. limit check Activate the titrant calibration result boundary check x
Min. titrant conc. Minimum value of the real concentration of the titrant x
Max. titrant conc. Maximum value of the real concentration of the titrant x
Standard name Name of the standard x x
Standard amount Amount of standard to be used for titer determination x x
Resolution Maximum number of decimals for the amount value of the standard x x
Min. amount Minimum amount of the standard x x
Change application parameters
60