Hach sension8, Руководство пользователя

Страница: 47 / 84

47
SECTION 4,
continued
4.3 Erasing Data
4.3.1 Erasing Single Data Points
1. To erase data, it must be recalled first. See Section 4.2.
2. When the desired data point is displayed, press
ERASE
.
3. The meter will display
ERASE
and
?
(flashing). Press
ENTER
to erase the data.
4. The meter will recall the next stored sample data. There are
three options at this point:
a. Press
ERASE
to erase the data.
b. Press
EXIT
to exit Recall mode.
c. Press an arrow key to scroll to other data points.
5. Repeat steps 2–3 for each data point that needs to be deleted.
4.3.2 Erasing All Data Points
1. To erase data, it must be recalled first. See Section 4.2.
2. When the point is displayed, press
ERASE
.
3. Press the up arrow. The instrument will show
Erase
and
All
with the flashing
?
. At this point the options are:
a. Press
EXIT
to return to the data point in Recall mode
without erasing.
b. Press the down arrow to return to the single point
erase prompt.
c. Press
ENTER
to erase all data and return to the
Reading mode.
4. After all the data are erased, the meter will return to the
Reading mode.