Hach sension6, Инструкция по эксплуатации, Страница: 58 / 86

57
SECTION 5,
continued
5.2.2 Sending Recalled Data Points
1. Recall data by following the steps in Section 4.2 on page 50 .
2. When the desired sample data is displayed, press
PRINT
.
3. The word
PRINT
and a flashing
?
will be displayed.
4. Press
ENTER
to print the recalled data point.
5. Press
EXIT
to return to the reading mode.
5.2.3 Sending All Stored Data
1. To transfer all data, a data point must be recalled first. See
Section 4.2 on page 50 .
2. When a data point is displayed, press
PRINT
.
3. Press the up arrow. The instrument will show
Print
and
All
with the
?
(flashing). At this point the options are:
a. Press
EXIT
to return to the next data point in Recall mode
without printing.
b. Press the down arrow to return to the prompt for printing
single data points.
c. Press
ENTER
to print all stored data (data that is printed
but not stored will not be included). The word
PRINT
will
be displayed until all the data has been printed. Then the
meter will return to the first recalled sample. Press
EXIT
to return to Reading mode or an arrow key to scroll to a
specific data point.
5.2.4 Printed Data Format
Printed data will have the following format:
Storage
Location
Concentration
%
Saturation
Calculated
True
Barometric
Pressure
Temp. Salinity Date Time
Serial
Number
Software
Version
# 1 *7.42 mg/L 100.3 25.0 inHg 69.8 °F o/oo 01/09/00 01:42 600010 P1.03
# 2 *7.42 mg/L 100.2 25.0 inHg 69.8 °F o/oo 01/09/00 01:42 600010 P1.03
# 3 *7.42 mg/L 100.2 25.0 inHg 69.8 °F o/oo 01/09/00 01:42 600010 P1.03