Hach ORBISPHERE 3650 Atex, Руководство пользователя

Страница: 26 / 51

24
Operating Information
To start the analyzer, press the keyboard POWER switch (located bottom left of the keyboard).
When you turn power on, the instrument displays its model number briefly, and then starts in
measurement mode.
You can access other instrument functions by pushing one of these keys while turning power on:
Once you have completed the installation and start-up procedures defined in Installation on
page 17 , the instrument can be operated independently, making measurements as a portable
oxygen or hydrogen analyzer. You may store these measurement values for later analysis via
the WinLog97 program (on your personal computer) or the memory view mode (on the
instrument). The WinLog97 program operation is described in detail throughout the manual,
where relevant.
Sensor calibration. Refer to Sensor calibration on page 40
Start automatic data acquisition. Refer to Automatic data acquisition on page 26
Start memory storage view. Refer to Viewing stored measurements on page 28
Display program identification information