Safety Information
2
Safe Usage and Handling Precautions
This section contains safety precautions which must be followed for safe operation of the
LightDeck MINI .
Precautions
Before using the LightDeck MINI, read this User Guide to ensure correct operation.
Observe the precautions. Failure to do so may result in injuries, cause property
damage, or produce incorrect results.
The LightDeck MINI is to be operated by personnel trained for its intended use and
correct operation.
Biohazards and Waste
Wear appropriate Personal Protective Equipment (e.g., wear gloves, lab coat, and
eye protection). Follow biohazard procedures when handling samples and cleaning
the LightDeck MINI.
Used test cartridges, pipette tips, and contaminated swabs or cloths used for cleaning
equipment are potentially infectious waste and disposal must follow applicable local,
state, or federal regulations.
When discarding the LightDeck MINI that may be contaminated with sample, disposal
must follow applicable local, state, or federal regulations.
Electrical Hazards
Use only the power supply included with the LightDeck MINI. The power supply
voltage applied to the equipment is AC90-264V
– 2.5A, 50-60 Hz.
To avoid electrical shock, observe the following precautions:
•
Avoid installation location where water may splash on the equipment.
•
Plug the power cable into an outlet with a grounding receptacle.
•
Make sure that all cables/cords have been properly connected.
When plugging the power supply in or removing it from an outlet, grasp the plug (not
the cord) to prevent damage to the cord.
There are no user serviceable parts. Do not remove covers or other parts to avoid
electrical shock or injury from moving parts.
Содержание LightDeck MINI
Страница 4: ......
Страница 18: ...Appendix 14 ...