Hach FL900 Series, Руководство пользователя

Страница: 17 / 30

N O T I C E
Network and access point security is the sole responsibility of the customer using the wireless instrument. The
manufacturer will not be liable for any indirect, special, incidental or consequential damages caused by a breach
in network security.
When the logger has a modem, data can be sent from the logger to the internet for remote access.
The user must first open an account with a mobile (wireless) provider. The instrument is then
registered to the data-hosting server (FSDATA), and the applicable communication settings are
programmed into the logger with FSDATA Desktop. If the modem was activated at the factory, go to
Add the logger to the FSDATA Server on page 18.
Pre-requisite: Make sure that the logger, logger test certificate and antenna are nearby.
Note: For optimal troubleshooting, install the FSDATA Desktop driver, add the logger to the FSDATA server, and
verify telemetry before visiting the deployment site.
1. Gather your account information.
a. Find the IMEI number from the label. Refer to Figure 9 .
b. Find the modem carrier model from the label.
2. Contact a wireless provider to start service on the modem. Make sure the wireless provider
matches the modem type in the logger, LVW3 = Verizon or LAT3 = PTCRB (AT&T, T-Mobile,
etc.). Request a data plan with a minimum 10 MB of data per month and SMS. (SMS is optional
but required to transmit alarm notifications to an email or mobile number).
a. Give the IMEI number to the provider. If requested, give the carrier model, also found on the
transmitter label.
b. Record the phone number for the modem.
3. Use the modem diagnostics in FSDATA Desktop to verify operation. Refer to the FSDATA
Desktop documentation.
Figure 9 Transmitter Label Examples
English 15