HACH LANGE sc200, Руководство пользователя

Страница: 3 / 142

Specifications
Specifications are subject to change without notice.
Table 1 Contacting conductivity
Specification Details
Measuring range Cell constant 0.05: 0–100 µS/cm
Cell constant 0.1: 0–200 µS/cm
Cell constant 0.5: 0–1000 µS/cm
Cell constant 1: 0–2000 µS/cm
Cell constant 5: 0–10,000 µS/cm
Cell constant 10: 0–200,000 µS/cm
Response time 0.5 seconds
Repeatability/precision (0–20 µS/cm) ±0.1/0.1 µS/cm
Precision (20–200,000 µS/cm) ±0.5% of reading
Maximum cable length 91 m (300 ft)
Warranty 1 year; 2 years (EU)
Table 2 Inductive conductivity
Specification Details
Linearity ≥ 1.5 mS/cm: ±1% of reading; < 1.5 mS/cm: ±15 µS/cm
Measuring range 0–2000 mS/cm
Response time 0.5 seconds
Precision
1
> 500 µS/cm: ±0.5% of reading; < 500 µS/cm: ±5 µS/cm
Maximum cable length 200 to 2000 µS/cm: 61 m (200 ft); 2000 to 2,000,000 µS/cm: 91 m (300 ft)
Warranty 1 year; 2 years (EU)
1
Radio frequency fields inthe 700–800 MHz range can cause inaccurate results.
General information
In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential
damages resulting from any defect or omission in this manual. The manufacturer reserves the right to
make changes in this manual and the products it describes at any time, without notice or obligation.
Revised editions are found on the manufacturer’s website.
Safety information
N O T I C E
The manufacturer is not responsible for any damages due to misapplication or misuse of this product including,
without limitation, direct, incidental and consequential damages, and disclaims such damages to the full extent
permitted under applicable law. The user is solely responsible to identify critical application risks and install
appropriate mechanisms to protect processes during a possible equipment malfunction.
Please read this entire manual before unpacking, setting up or operating this equipment. Pay
attention to all danger and caution statements. Failure to do so could result in serious injury to the
operator or damage to the equipment.
English 3