HACH LANGE ORBISPHERE 3654, Руководство пользователя, Страница: 26 / 58

24
Operating Instructions
4.4.6 Clearing stored values
To clear all the values stored in the analyzer via the WIN3654 program, choose the
Clear Data
command from the
Logger
menu. Since this action will clear the storage memory of the
instrument, a warning appears first as shown left in Figure 7 .
Choose
OK
to bring up the next dialog box to confirm the clear action.
Choose
Clear
to start the memory clear operation. A message,
Reset should be completed
appears in this box when the task is finished.
Note:
You can accomplish the same thing passively, by simply allowing the analyzer to overwrite a set of
stored values with new ones.
4.5 Monitoring measurements in real-time
You may wish to analyze a particular sampling point via the WIN3654 program's
Monitoring
menu. To use this Monitoring chart, the analyzer must be connected to your PC.
Choose
Monitoring
from the WIN3654 menu to bring up a chart display like the one illustrated
in Figure 8 .
The Monitoring chart shows the gas concentration (in blue), temperature (in red), and pressure
(in green) as the sample is being measured by the 3654 instrument. The chart is updated
directly from instrument measurements, at a rate determined by the time scale set in the
TIMEBASE
box at the lower right corner of the chart.
Figure 7 Clear stored values
Figure 8 Real-time monitoring