
7
%
ION
TIMER
Start or stop the humidifier.
When turned on, the humidifier will start in
AUTO-mode.
Set fan speed:
Press repeatedly to choose fan speed. Select LOW,
MEDIUM, HIGH or AUTO. In AUTO-mode, the fan speed will be set
depending on your selected humidity level. Set fan speed is shown as
dashes on the right hand side of the display.
Set desired humidity.
Press repeatedly to choose desired humidity
between 40% and 75%, or choose CO. In CO-mode, the humidifier will
run continuously and will not stop until shut off or the setting is changed.
When setting humidity level, set value is shown in the display for a couple
of seconds. After, the display will return to showing ambient temperature
& humidity level.
Note that the humidifier will operate only when set humidity level exceeds
the ambient humidity level. When set humidity level is higher than
ambient humidity level the unit will stop and automatically restart when
the humidity drops.
Activate the ionizer.
The ionization is an air cleaning feature and will give
you a better indoor air quality. The ION symbol is visible in the display
when the function is activated. Press again to deactivate
Activate the heater
. When activated, the humidifier will exhasut warm
mist. By using the heater you will get a faster and more pleasant
humidification effect. The heater symbol is visible in the display when the
function is activated. Note that it may take up to 15 min before the mist is
heated properly. Press again to deactivate the heating function.
Set timer
. When the humidifier is operating, press the timer button to
choose time for automatic shut off. Select between 1 to 12 hours. Set
time is shown in the display, counting down with every hour passed. After
set time has passed, the humidifier will shut off. Press the TIMER button
repeatedly until it says ”- H” to deactivate the timer function.
When this symbol is visible there is not enough water in the water tank.
The humidifier stops. Refill the water tank to restart the humidifier.
Low water indication symbol
4.3 Control panel
English