Lorenz Hasenbach GmbH u. Co. KG · D-65517 Bad Camberg · Tel. 0049 6434 / 25-0 · www.haca.com
MA 5103 b-UK
3
MA 5103 b-UK
Teile-Nr. 01/0117000455
Deutsch
Fig. 6
Hook bolt
Special HACA-nut
Washer
Spacer sleeve
Cylinder screw
Washer
Nut and
lock nut
Fig. 7
Fig. 9
Fig. 8
2.3 Assembly on steel single-rail ladders
Rest platform model 0544.1913/0944.1913
Stop the folding rest platform at the desired
height (see 2nd as Fig. 8).
Insert the cylinder screws from the front through
the top-hat rail and place the two spacer sleeves
between the rail and the rest platform. The holes
+ of the rest platform are used for this (Fig.
1). You can now mount and tighten washer and
nut from behind (Fig. 9).
The rest platform must be aligned in such a way
that the foot rests are horizontal.
2.2 Assembly on aluminium single-rail
ladders Rest platform model 0643.1913
Insert the supplied T-bolts from the front
through the holes + (Fig. 1).
Insert a washer from behind and screw on a
nut. The thread should protrude far enough
from the nut in order that it can be gripped.
Stop the folding rest platform at the desired
height (see 2ndas Fig. 6).
Now insert the T-bolt into the side rail of the
ladder and turn it clockwise horizontally to the
side rail.
The marking at the end of the thread indicates
the position of the screw head.
The rest platform is now screwed into place.
The rest platform must be aligned in such a
way that the foot rests are horizontal. Finally,
screw on the two remaining nuts and lock
them with the ones that are already mounted
(Fig. 7).
