3.7.1 4-port Ethernet LAN connections
The M10-Smart router family incorporates 4 10/100/1000 Base-T ports with automatic MDI/MDIX to connect to a loc-
al area network (LAN).
Please pay careful attention to the labeling to avoid mistaking this switch for other types of ports:
Fig. 25:
LAN ports
Note
Only the LAN 1 connector is available during booting and in BIOS mode.
Note
By default, LAN ports are configured as independent and have their own MAC address. They are iden-
tified as
ethenet0/0/0
(LAN1) to
ethernet0/0/3
(LAN4).
If you need them to belong to a bridge, please see manual: “Teldat
Dm717-I Bridge
” for more informa-
tion.
3.7.2 WAN connections
The M10-Smart router family has 2 Gigabit Ethernet interfaces for WAN connection. These ports have 2 connectors
- SFP for an optical link and RJ45 for a 10/100/1000 Base-T link - but they cannot work simultaneously.
Please pay careful attention to the labeling to avoid mistaking these ports for other types of ports:
Fig. 26:
WAN connectors
Note
These WAN interfaces have a UTP/Fiber Media Auto Detection feature.
Only one of the connectors must be used for everything to work well.
Note
WAN connectors do not work during booting and in BIOS mode.
Teldat S.A.
3 Components and Power Supply
M10/M10L-Smart
17
