Note
The necessary kit is not provided by default and has to be acquired separately.
The rack kit consists of two brackets (A and B) and two screws (C).
Fig. 12: Rack mounting kit
The kit can be installed at the front or back of the device.
Fig. 13: Front panel installation option
Fig. 14: Rear panel installation option
To install the kit, follow these steps:
• Step 1. Place side A as shown in the image. Place the bracket at the bottom (1) and adjust it until it is fastened and
in line with the side panel (2).
3 Components and Power Supply
Teldat S.A.
12
M10/M10L-Smart
