Habitat Gerry 812674, Руководство по сборке

Страница: 3 / 16

Gerry
- 12/2022 2
BC
EN
This manual contains important information that should be kept
for future reference.
Self-assembly.
Warning! Keep children away from the assembly area. Leave the
plastic bags out their reach. The small parts pose a choking hazard.
Material
Structure, top, large drawer front: oak veneered particleboard
lacquered.
Drawer bottom: oak veneered medium density fibreboard (MDF)
lacquered.
Drawer frame, feet: solid oak lacquered.
Other: cowhide leather.
Assembly instructions
Assembly Instructions
Before beginning assembly, identify all components using the
manual.
In order not to mislead components, do not throw the packaging
before completing the full assembly.
This product must be installed by an adult.
Plan to assemble the furniture as near as possible to where it will
be installed.
Do not use a power screwdriver as it may damage the panels.
Assemble on a clean, flat surface.
Recommendations for use
This product was designed for indoor use only.
Do not stand on the product.
Do not sit on the product.
Do not overload drawers.
The wood-based products, particle board, painted, varnished and /
or lacquers may emit an odor when opened. This smell disappears
after a few weeks if the room is properly ventilated.
Maintenance
Remove dust regularly with a dry cloth.
Clean with a soft, damp cloth. Then wipe with a clean dry cloth.
Mop up spills immediately with a clean, dry cloth.
In order not to damage the surface, it is recommended not to file a
hot object or wet directly.
Do not use magazines or newspapers as a mat. The ink used may
leave traces that can stain permanently the furniture surface.
To avoid the appearance of marks, not to leave any stationary
object for more than two months.
To avoid scratches, do not use a sponge or recurrent grain cleaner.
Do not use abrasives.
The use of special products for furniture is not necessary or
recommended. Clean veneer with a damp cloth. Then wipe with a
dry cloth.
Do not use abrasives.
Do not place the product near a heat source (radiator, fireplace
...) nor a moisture source. Heat and humidity may damage the
product.
Maintain with movements in the direction of wood fibers.
Leather part
Clean every 2 months with a slightly damp soft cloth. Then wipe
with a dry cloth.
Use a cleaning kit for upholstery leather.
Feeding the leather regularly so that it keeps its flexibility.
Keep the label with lot number, it may be useful in case
of complaint.
If you have any comments or suggestions regarding this product,
assembly instructions or service received, please enquire at your
nearest store or contact us on our website at: www.habitat-design.
com or write to this address: HABITAT, 70 AVENUE VICTOR HUGO,
93300 AUBERVILLIERS FRANCE.
The packaging elements are to be sorted out according to local
requirements. Make the right sorting choice and give them a
second life!
By sorting out this manual you contribute in preserving
the environment. This manual can still be found on
www.habitat-design.com.