Installation Instruction
Artikel: 1E0671-1
Seite
6
von
8
Bezeichnung: MCR 2.9
Druckdatum: 07.05.15
Ersteller :
1E0671 & -1 Installation Instruction
Erstelldatum:
Version:
Doku Nr.: 3D032-
Precautions of Use
Avoid using the RFID Reader in the presence of strong electomagnetic waves.
The RFID Reader supplies power to the card or tag using an electromagnetic wave to communicate
with the card or tag. The presence of strong electromagnetic waves affects communication between
the RFID Reader and card or tag, causing reduced access area or inability to access the card. Test the
RFID Reader using the actual power source in the installation location environment before use.
Keep precision devices that might be affected by electromagnetic waves away from the RFID
Reader.
Because the RFID Reader constantly emits an electromagnetic wave of about 125 KHz and 13.56
MHz, placing precision devices that might be affected by electromagnetic waves near the reader can
cause malfunction or failure of the devices. When operating the reader, keep precision devices away
from the RFID Reader. If such precision devices must be located near the RFID Reader, shield the
precision devices with a metal cover and test the devices to check for any influence.
Avoid using multiple RFID Readers in proximity to each other.
The RFID Reader supplies power to the card or tag using an electromagnetic wave to communicate
with the card or tag and constantly emits an electromagnetic wave of about 125 KHz and 13.56 MHz.
Using multiple readers in proximity to each other causes interference, interrupts communication
between the card and reader, and prevents access to the card.
Safety Information
To maintain compliance with the FCC RF exposure guidelines, install and operate this equipment
with a minimum distance of 20 cm between the radiator and your body.
Use only with the supplied antenna. Unauthorized antenna, modification, or attachments can
damage the transmitter and violate FCC regulations.
