Habasit Italiana S.p.A.
Via del Lavoro 50
I-31016
– Cordignano (TV)
Tel.: +39 0438 9113
Fax: +39 0438 912374
Use and maintenance manual
CQ-02
Author:
FT
Page 8 of 14
Edition:
04/2018
R. 0
Replaces:
Wait until it forms a bead of molten material of 1-2
mm / 0,04-0,08 in., which also depends on the
diameter of the round belt.
WARNING
Do not inhale vapors generated during welding. Only weld thermoplastic belts in suitably
aerated rooms!
The installation of suitable exhaust devices and/or personal protection equipment must be
assessed by the user based on work site characteristics and current local laws.
Gently open the bars [1] by slightly unscrewing the
tensioning knob.
Quickly remove the welder.
Quickly close the bars [1] (put the two melted
surfaces in contact). The welding pressure is
generated by the tensioning knob [5]. Wait at least 5
minutes for the welded area to cool down.
WARNING
Do not touch the hot zone of the welder!
Keep device away from water and meltable substances.
Содержание PQ-02
Страница 20: ......
