Habasit Italiana S.p.A.
Via del Lavoro 50
I-31016
– Cordignano (TV)
Tel.: +39 0438 9113
Fax: +39 0438 912374
Use and maintenance manual
W-01
Author:
FT
Page 11 of 15
Edition:
06/2017
R. 0
Replaces:
7.2 Replacement of the power cord on welder W-01/6 or W-01/8
Check power cord periodically. In case of damage replace with the same type (imprinted on the cable). To
make sure only skilled staff will do this repair, special tools are required for this operation.
All work on the hot-welding device involving electrical parts has to be carried out by the
respective specialists only.
Observe your local laws about required training of such personnel.
7.3 Accessory/spare parts orders
Spare parts and accessories can be directly ordered from the manufacturer at the following address:
Please clearly specify ordered part codes.
Enter codes based on Drawings (see chapter “SPARE PARTS”) and, if possible, the power voltage required
for mains connection.
The use of other branded spare parts that do not meet Habasit specifications is prohibited.
Habasit is not liable for the use of non-original Habasit spare parts.
7.4 Warranty
All tools are subject to attentive final inspection. They are guaranteed free of material and factory defects for
1 year provided they are used correctly.
7.5 Technical consulting
Our experts are available for all consultations. For technical questions concerning welding device operations
and conditions, contact the manufacturer at the address listed above.
Habasit Italiana S.p.A.
Via del Lavoro, 50.
31016 CORDIGNANO (TV) - ITALY
Tel.: +39 0438 9113
Fax: + 39 0438 912374
Содержание PQ-02
Страница 20: ......
