HAAS + SOHN HSP 2.17, Инструкция по установке и эксплуатации

Страница: 8 / 31

8
5.8. Switching off
– operating status OFF
Procedure:
Press the left key.
OFF mode is displayed in icon
on the display . The stove
initiates the Cooling down operating status and can no
longer switch to Heating mode by itself, even if the room
temperature falls below the set room temperature.
During OFF operating status, the operator console and
parts of the control system continue to be supplied with
power. (About 9 Watts per hour).
5.9. Power cut
The control unit has a backup battery so that the data
are retained during a power cut.
A distinction is made between a short power cut and a
long power cut.
Short power cut
– duration of the power cut shorter than
30 seconds:
Once the electricity supply has been restored, the stove
continues its operation from where it was before the
power cut.
Long power cut
– duration of the power cut longer than
30 seconds:
Once the electricity supply is restored, the stove
switches to Safety shutdown operating status.
A small amount of flue gas may escape during a power
cut.
6. Description of operator console keys
6.1. Operator console
As can be seen in the figure, the display is divided into
five areas.
6.2. Description of the symbols
Operating status
Time
Room temperature-target
Room temperature -actual
6.2.1 Display software version after power
connection
As soon as the mains plug is connected, the software
version will be for about 7 seconds on the display.
Software HSP1-V1.12
6.2.2 Setting the language at initial
During initial start after displaying the existing software
version, the adjustment of the desired language.
Procedure:
With the two middle button
+
and
–
select the desired language.
Then confirm "
OK" by pressing the
Right button
✔
OK
>deutsch <
english
Language
Language