15
Once the switch-off process has ended, the error number is displayed under operating status in the FAULT menu.
10.9. Error display - Fault
∓
26°C
23°C
F018
Ein
Quit.
+++ error +++
The stove can no longer be automatically started up.
The operator can see the fault on the display.
Once the fault has been properly corrected and the error message on the operator console has been cleared, the
stove can be started up again.
Procedure:
The error is cleared by pressing the
“OK”
button
Welcome page is displayed.
Otherwise please read the information under Faults, causes, correction.
See instructions on pages 21, 22, 23.
10.10.
OFF
11. Overheating protection
A safety temperature limiter (STL) automatically switches the stove off if it overheats. The error F001 is shown on the
console display under operating status.
12. Power cut
The control unit has a backup battery so that data is retained during a power cut.
A distinction is made between a short power cut and a long power cut.
Short power cut:
The short cut lasts for less than about 30 seconds:
Once the electricity supply has been restored, the stove continues its operation.
Long power cut:
The short cut lasts for more than about 30 seconds:
Once the electricity supply is restored, the stove switches to the Switch-off operating status and
subsequently to “OFF”.
13. Cleaning and maintenance work (see Appliance sheet 4).
14. Faults, causes, correction
You can correct simple operating faults yourself with the following guide. For further information please consult your
specialist dealer.
If a fault occurs, you will be shown this on the display.
In the event of a fault, do not pull the mains plug out straight away, so that the internal safety functions can
continue to operate fully. Only in this way can the flue gases present be extracted via the chimney using the
fan. Only pull out the mains plug before starting work on the cold appliance.
