10
Procedure:
The functions can be selected with the
“Plus”
or
“Minus”
buttons.
The function is chosen by pressing the
“OK”
button.
9.1.1. Operating mode Week program – Settings
Can only be selected on HSP6, HSP8 and on HSP2 as an option
b001
off
↓
ok
weekly prog.
back
oper. Mode
>off <
on
Procedure:
The week program function is selected with the
“Plus”
or
“Minus”
buttons.
The week program function is chosen by pressing the
“OK”
button.
↱
<>
change
2 E 06:00 A 18:00 23°
3 E 18:00 A 24:00 26°
weekly prog.
mo tu we th fr sa su
1 E 00:00 A 06:00 25°
The respective
week day
can be selected with the
“Plus”
or
“Minus”
buttons.
The day is chosen by pressing the
“OK”
button.
Setting heating zones:
The required
switch-on time
can now be set with the
“Plus”
or
“Minus”
buttons.
The
switch-off time
on the respective week day can be programmed by pressing the right-hand arrow button.
The required
room temperature
is selected by pressing the right-hand arrow button again.
This procedure can be used to set 3 heating zones for each day with the respective
room temperature.
Week program symbol active:
∓
28°C
26°C
standby
menu
10:34
To exit the function, press the
“On/Off”
button.
Early start
: If the stove is on standby between heating zones, it is possible to start the stove early by
pressing the
“On/Off”
button/ The next heating zone is selected directly for this.
Early stop
: It is also possible to activate an early stop in the week program heating mode by pressing the
“On/Off”
button, in order to end this one heating zone before time. The next heating zone will start again as
previously determined.
