Haas Automation OFFICE MILL, Руководство оператора и инструкция по установке

Страница: 8 / 8

6
96-0198 Rev V
March 2012
Operation
Work Envelope with Rotary Products
You can use HA5C indexers with AC-25 or AC-125 air collet closers, or an HRT110 or
TR110 rotary table with your Ofice Mill. Rotary products have a full range of travel only
when mounted in the mill table front T-Slot. Also, the TR110 rotary table may only be
mounted with the length of the unit parallel to the X-axis of the mill.
Office Mill with HRT110 Rotary Table Office Mill with TR110 Rotary Table
The rotary table can be mounted in other T-slots or in other orientations (HRT); however,
check clearances and cable routing before running a part. The rotary table and workpiece
may collide with tooling or the interior of the machine.
Maintenance
General
Refer to the maintenance section of the Mill Operator’s Manual for maintenance proce
-
dures.
Tool Changer
Lubricate the extractor langes of the tool changer every month. Use a synthetic grease
wth an NLGI grade of 1.5 or 2.