QUestioN: i don’t see much steam coming out of the
Haan
®
Fs-50 steam Cleaning Floor sanitizer – why not?
Actually, you shouldn’t be able to see that much steam coming
out of the unit. The truth is, the more steam you see when in
use, the less effective a floor sanitizer is because the steam
should be physically directed to cleaning your floors (or
other horizontal hard surfaces) and not escaping through
other parts of the steamer.
QUestioN: the
Haan
®
Fs-50 is leaving my floor wet.
Why, and what can i do about it?
Your cleaning pad may need to be changed. For optimal
performance, the pad should be changed after every 10
minutes of use.
QUestioN: How long can you use a
Haan
®
cleaning
pad
before it needs to be changed?
The pad should be changed approximately every 10 minutes,
or when it becomes saturated with water. The machine will
become harder to push smoothly on the floor when the pad
is saturated.
QUestioN: How long does a tank of water last? How
often do i need to refill the tank?
A full tank will last approximately 20 minutes.
QUestioN: sometimes my floor sanitizer becomes hard
to push – why?
If the unit is hard to push, it is likely because the cleaning
pad is too wet or the angle at which you are using the machine
is too high. The lower the handle, the easier the Floor Sanitizer
is to push across the floor and if doing this does not help, try
replacing the pad with a dry one.
QUestioN: Will the
Haan
®
Fs-50 clean grout?
Yes, but it needs a little help. If you glide your
Haan
®
over
the problem grout areas allowing the steam to soften the
surface dirt and then scrub with your standard blue Ultra-
Microfiber Pad, it should effectively clean surface dirt off
your grout.
?
?
?
?
?
Questions About the Floor Sanitizer
?
www.
HAAN
USA.com 877-HAAN DIRECT / 877-422-6347
pg 19