2-13
Starting the device
The following procedure uses the WX1804H-PWR access controller as an example.
To start the device:
1.
Power on the device. The device initializes its memory and runs the BootWare image. The
following information appears on the terminal screen:
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Booting Normal Extended BootWare
Press Ctrl+T to start heavy memory test
****************************************************************************
* *
* H3C WX1804H-PWR BootWare, Version 1.06 *
* *
****************************************************************************
Copyright (c) 2004-2020 New H3C Technologies Co., Ltd.
Compiled Date : Mar 10 2018
CPU Type : 1000MHz Multi-core Processor
Memory Type : DDR3 SDRAM
Memory Size : 1024MB
Memory Speed : 1333MHz
BootWare Size : 768KB
Flash Size : 1024MB
CPLD Version : 002
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
2.
Press
Ctrl
+
B
at the prompt within 4 seconds to access the BootWare menu.
To access the BootWare menu after the system enters the system image file reading and
self-compressing process, restart the device.
Loading the main image files...
Loading file flash:/system.bin..............................................
......Done.
Loading file flash:/boot.bin.........Done.
Image file flash:/boot.bin is self-decompressing............................
...........................Done.
System image is starting...
…………
Line con0 is available.
Press ENTER to get started.
