H3C WX Series, Руководство по началу работы

Страница: 18 / 32

18
2.
Required: Specify a radio type for the radio and enter radio view. Support for this
command depends on the AP model.
[Sysname] radio radio-number [ type { dot11a | dot11an |dot11b | dot11g |
dot11gn } ]
3.
Required: Enable the radio. By default, all radios are disabled.
[Sysname]radio enable
4.
Required: Exit interface view.
[Sysname]quit
Saving the current configuration
You can modify the current configuration on your AC at the CLI. However, the current
configuration is temporary. To make the modified configuration take effect at the next
startup, you must save the current configuration to the startup configuration file.
Complete these tasks to save the current configuration:
Task Remarks
Configuration file encryption Optional
Modes in saving the configuration Required
Configuration file encryption
Support for this feature depends on the AC model.
This feature enables you to encrypt a configuration file before saving it (using the save
command). If you want to read the encrypted configuration file, you must decrypt it
with a legal key. Two kinds of keys are supported to encrypt a configuration file, and you
can select either of them according to your application environment:
Private key: A configuration file encrypted by a private key can be decrypted and
recognized only by the local device.
Public key: A configuration file encrypted by a public key can be decrypted and
recognized by all devices supporting this feature.
To enable configuration file encryption:
1.
Enter system view.
<Sysname>system-view
2.
Optional: Enable configuration file encryption. Disabled by default. The current
valid configurations are directly saved to the configuration file.