6
Figure 7 Attaching the mounting bracket to the wall
5.
Position the four pegs on the AP rear into the keyed slots in the bracket, and then slide the AP
until you feel it snaps into place.
Figure 8 Attaching the AP to the wall/ceiling bracket
Mounting the AP on a ceiling
CAUTION:
The ceiling for installing the AP must be less than 18 mm (0.71 in) in thickness, and can bear a load
of 5 kg (11.02 lb). If the ceiling is not strong enough, use boards to reinforce the ceiling as a best
practice.
To mount the AP on a ceiling:
1.
Remove the ceiling tile and use the mounting bracket to mark the installation holes on the
ceiling tile.
