53
Automatically managing and upgrading the
applications through an AC or a US
You cannot directly manage the AP working in the fit mode, but you can manage it by
associating it with an AC or a US.
Figure 13
Fit AP and AC (or US) network diagram
PC
Console
DHCP Server
PoE
AC or US
Auto Update Server
TFTP Server
AP
NOTE:
You can use a DHCP server in the network to assign IP addresses for the PC and the fit AP.
Configure IP addresses in the same network segment for the TFTP server and the TFTP
client. In this example, configure the IP address of the TFTP server as 192.168.0.1 and
192.168.0.2 for the Ethernet interface of AC or US connecting with the TFTP server. Use
the
ping
command to check whether the AP and the AC are connected successfully.
Associating the fit AP with an AC or a US
Viewing the system information of the fit AP
Since a fit AP is uniquely associated with the AC or US by the serial-ID of the fit AP, you
need to first view the serial-ID of the fit AP. Each model of the WA2200 series has a model
number. The serial-ID and the model number of a fit AP are set before delivery and are
printed on the barcode at the back of the AP.
Associating the fit AP with the AC or US
Follow these steps to associate the fit AP with the AC or US:
1.
Enter system view.
