21
[Sysname]wlan client idle-timeout
interval
2.
Optional: Configure the keep alive timeout interval for the device. By default, keep
alive function is disabled.
[Sysname]wlan client keep-alive
interval
3.
Optional: Set the device discovery policy. By default, the device receives
broadcast messages.
[Sysname]wlan broadcast-probe reply
Specifying the country code
Required: Specify the country code. By default, the country code is
CN
. For more
information about country code and country, see
WLAN Service
in the
WLAN
Command Reference
in the
H3C WA Series WLAN Access Points Command References
.
[Sysname]wlan country-code
code
Configuring a service template
1.
Required: Create a WLAN service template. By default, a clear-type
service-template has been configured.
[Sysname]wlan service-template
service-template-number
{ clear | crypto }
2.
Optional: Disable the advertising of SSID in beacon frames. By default, the SSID is
advertised in the beacon frames. If the advertising of the SSID in beacon frames is
disabled, the SSID must be configured for the clients to associate with the AP.
[Sysname]beacon ssid-hide
3.
Optional: Specify the maximum number of associated clients in a BSS.
[Sysname]client max-count
max-number
4.
Required: Enable the authentication method. By default, open system
authentication is enabled. If the current service template is of clear type, you can
only enable open system authentication. If the current service template is of crypto
type, you can enable open system or shared key authentication.
[Sysname]authentication-method { open-system | shared-key }
5.
Required: Enable the service template. By default, the service-template is disabled.
[Sysname]service-template enable
Configuring the radio of an AP
1.
Enter radio interface view.
[Sysname]interface wlan-radio
interface-number
2.
Required: Specify a radio type for the radio. Support for this command depends on
your device model.
[Sysname]radio-type { dot11a | dot11an | dot11b | dot11g | dot11gn }
