H3C UniServer T1100 G3, Руководство пользователя

Страница: 16 / 138

2-2
2.1 Configuring RAID in UEFI Boot Mode
This section describes how to configure the RAID through the RST onboard soft RAID in UEFI boot
mode. Before configuring the RAID, ensure that the boot mode is set to UEFI boot mode. The
specific operation steps are as follows: Enter the BIOS Setup screen, choose Advanced > CSM
Configuration , set the Video and Storage to UEFI , and press F10 to save the settings. The
server will automatically restart. Then, re-enter the BIOS to complete the operation. For details,
see the H3C Uniserver T1100 G3 Server Greenlow Platform BIOS User Guide .
2.1.1 Setting the RST Working Mode
This section describes how to set the operating mode of the RST onboard soft RAID to RAID mode.
The operation procedure is as follows:
(1) After the server is powered on or rebooted, on the BIOS boot screen, press Esc or Delete as
prompted to enter the BIOS Setup screen, as shown in
图
2-2 . Refer to the key operation tips
in the lower right corner of the screen to navigate and modify settings.
图
2-2 BIOS Setup screen
(2) Choose Security > PCH-IO Configuration , and press Enter , as shown in
图
2-3 .