H3C SR8800 Series, Руководство по установке

Страница: 61 / 134

52
Figure 50 Installing an SFP module
IMPORTANT:
•
Do not remove the dust plug of the SFP module port before installing an optical fiber.
• For an SFP module installed with an optical fiber, remove the fiber before you install the SFP module into
the slot.
Connection procedure
1. Put on an ESD wrist strap, and make sure it makes good skin contact, and is correctly grounded.
2. Remove the protective cap from the fiber connector, and use dust free paper and absolute alcohol
to clean the end face of the fiber connector.
3. Connect one end of the fiber to the SFP module of the router.
4. Connect the other end of the fiber to the peer device.
Figure 51 Connecting an optical fiber to an SFP module
Installing fiber management tray (optional)
The installation method described below is based on an N68 rack. The installation procedure is only for
your reference if you use a non-N68 rack.
A fiber management tray (FMT) is installed in a rack for winding redundant fibers between SR8800
routers and other devices.
1. Preparations
Confirm the following prerequisites:
{
The rack is fixed.
LC plug
SFP module