14
−
Use the
display hardware internal module
pos
interface-number
reg
1
command in
probe view to verify that the FPGA configuration is correct.
3.
If the problem persists, contact H3C Support.
Related commands
This section lists the commands that you might use for troubleshooting POS interfaces.
Command
Description
debugging physical packet
Enables packet debugging on the device.
display hardware internal module
interface-name
interface-number reg
1
Displays FPGA information about POS interfaces.
display hardware internal module
interface-name
interface-number
reg
3
Displays physical layer information about POS
interfaces.
display hardware internal module
interface-name
interface-number
statistics
Displays maintenance information about POS
interfaces.
reset counters interface pos
interface-number
Clears POS interface statistics.
