H3C SOHO IE4300, Справочник по командам

Страница: 3226 / 3296

2
Field Description
•
Yes —The port has been specified as a line clock
input port.
•
No —The port is not specified as a line clock input
port.
display network-clock status
Use
display network-clock status
to display the operating state of the network clock
monitoring module.
Syntax
display network-clock status
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the operating state of the network clock monitoring module.
<Sysname> display network-clock status
Mode : Auto
Reference : N/A
Traced reference : N/A
Lock mode : Unknown
SSM output level : SSUB
SSM control enable: On
Table 2 Command output
Field Description
Mode
Clock reference selection mode:
•
Auto —Automatic reference
selection.
•
Manual —Manual reference
selection.
Reference Line clock input port
Traced reference
Clock reference that has been selected and traced. This
field displays
N/A if no clock reference has been
selected.
Lock mode
Phase lock state of the clock monitoring module:
•
Freerun —Freerun mode.
•
Locked —Locked (traced)
mode.
•
Holdover —Holdover state.
•
Pre-locked —Pre-locked mode.
•
Lost —The clock signal has
been lost.
•
Unknown —No timing signal is