H3C SecPathT5000-C Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 64

H3C SecPathT5000-C Скачать руководство пользователя страница 15

8

Installing the device

WARNING!

Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to open
the chassis, contact the local agent of H3C for permission. Otherwise, H3C shall not be liable for any
consequence caused thereby.

The installation method is similar for the T50X0 IPS series. This document uses a T5000-S as an
example. The device view varies by model. The following figures are for illustration only.

Installation flow

Table 8 Installation flow for the T50X0 IPS series

Step

Description

1.

Start

Before installation, make sure all requirements on the checklist
are met and the device is powered off.

2.

Grounding the device

Before installation, make sure the device and rack are reliably
grounded and you wear an ESD wrist strap.

Installing the device in a standard
19-inch rack

The device is heavy. Both mounting brackets and slide rails are
required to support the weight of the chassis.

4.

Installing a power supply

Before you install a power supply, make sure the power supply
is not connected to any power source and the grounding cable
of the device is connected reliably.

5.

Installing a fan tray

Install compatible fan trays on the device.

6.

Installing an interface module

No interface modules are provided with the device. Prepare
them yourself as required.

7.

Installing a drive

Install compatible drives on the device.

8.

Connecting Ethernet cables

The device provides various ports. Choose compatible
transceiver modules and cables as required. To avoid bodily
injury or device damage, read the restrictions and guidelines
carefully before connection.

9.

Connecting power cords

Connect compatible power cords to the power supplies.

10.

Verifying the installation

Verify that the device is installed securely and reliably
grounded, and that the power supplies are as required.

Grounding the device

CAUTION:

•

Correctly connecting the grounding cable is crucial to lightning protection and EMI protection.

•

Do not connect the grounding cable to a fire main or lightning rod.

The device provides a primary grounding point (above the power supplies) on the rear panel and an
auxiliary grounding point on the left side. The primary grounding point has a grounding sign and a
grounding screw while the auxiliary grounding point does not.

«
...
13
14
15
16
17
...
»

Содержание SecPathT5000-C

































































Отзывы:

Нет отзывов