23
<Sysname> display logbuffer
HundredGigE 1/0/5: This transceiver is NOT sold by H3C. H3C therefore shall NOT guarantee
the normal function of the device or assume the maintenance responsibility thereof!
Troubleshooting flowchart
Figure 6 Troubleshooting non-H3C transceiver module error message
Solution
To resolve the problem:
1.
Verify that the transceiver module is an H3C transceiver module:
Execute the
display transceiver interface
command to view the vendor name of the
transceiver module.
[Sysname] display transceiver interface hundredgige 1/0/1
HundredGigE 1/0/1 transceiver information:
Transceiver Type : 40G_BASE_LR4_QSFP_PLUS
Connector Type : LC
Wavelength(nm) : 1301
Transfer Distance(km) : 10(SMF)
Digital Diagnostic Monitoring : YES
Vendor Name : H3C
Ordering Name : QSFP-40G-LR4-WDM1300
{
If the vendor name field does not display H3C, replace the transceiver module with an H3C
transceiver module.
{
If the vendor name field displays H3C, perform the following tasks:
−
Execute
the
display hardware internal transceiver register interface
command in
probe view to save the transceiver module information.
Is the vendor name H3C?
H3C transceiver module?
Replace it with an H3C
transceiver module
Replace it with an H3C
transceiver module
No
Yes
No
Yes
No
Yes
Yes
No
Resolved?
Contact the support
Non-H3C transceiver module
reported in system logs
End
Resolved?
