•
When the operating mode of the switch changes from standalone to IRF, the member ID of the
switch is needed for the auto-conversion of the configuration file. If the switch has no member ID
configured, use the
irf member
command to set a member ID for it.
ely identify and manage members. To set a member ID for
the switch when it operates in standalone mode, use the
irf member
command, and the member
ID takes effect after the operating mode of the switch changes to IRF. To set a member ID the switch
ber
new-member-id
command,
kes effect after the switch reboot.
ber
renumber
.
Examples
h operating in standalone mode to
2
.
[sysname] irf member 2
fect after the switch reboots and operates in IRF mode
Syntax
ember
member-id
description
text
-id
description
Default le
anage level
Paramete
of 1 to 127 characters.
Descripti
default, no description is configured for a member switch.
rates in IRF mode. If you configure the description
e operating mode of an IRF member switch to
ion loses effect even if you switch the operating mode of the switch to IRF
ription as needed.
or IRF member switch 1.
<Sysname> system-view
F1Num001
•
An IRF fabric uses member IDs to uniqu
when it operates in IRF mode, use the
irf member
member-id
renum
and the member ID ta
Related commands:
irf mem
# Set the member ID of the switc
<Sysname> system-view
Info: Member ID change will take ef
irf member description
irf m
undo irf member
member
View
System view
vel
3: M
rs
member-id
: Specifies the ID of an IRF member switch.
text
: Specifies the description of the member, which is a string
on
Use the
irf member description
command to configure a description for an IRF member switch.
Use the
undo irf member description
command to restore the default.
By
This command is available only when the switch ope
of a specified member switch, and then switch th
standalone, this configurat
again. In this case, you need to re-configure the desc
Examples
# Configure a description f
[Sysname] irf member 1 description
15
