[Sysname] irf-port 2/2
-port 2/2] quit
ort-number
o irf-port
port-number
View
Default le
Paramete
rt-number
: Specifies the IRF port number. The value can be either 1 or 2.
Descripti
r
command to create an IRF port and enter IRF port view when the switch
ode. If the IRF port is already created, this command enters IRF port view.
er
command to delete the specified IRF port.
rt is created on the switch.
Related commands:
port group interface
.
# Create IRF port 1 on the switch operating in standalone mode.
[Sysname] irf-port 1
] quit
enable
p enable
o mad arp enable
View
Default level
Paramete
one
Descripti
mmand to enable ARP MAD to detect the IRF fabric for multi-active collisions.
.
[Sysname-irf
irf-port p
Syntax
irf-port
port-number
und
System view
vel
3: Manage level
rs
po
on
Use the
irf-port
port-numbe
operates in standalone m
Use the
undo
irf-port
port-numb
By default, no IRF po
Examples
<Sysname> system-view
[Sysname-irf-port 1
mad arp
Syntax
mad ar
und
VLAN interface view
3: Manage level
rs
N
on
Use the
mad arp enable
co
Use the
undo mad arp enable
command to disable ARP MAD
22
