Operation Manual – RPR
H3C S9500 Series Routing Switches
Chapter 1 RPR Configuration
1-12
1.5.1 Adding a static ringlet selection entry
Follow these steps to add an entry into the static ringlet selection table:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Enter RPR logical
interface view
interface interface-type
interface-number
—
Add a static ringlet
selection entry
rpr static-rs
mac-address
{
ringlet0
|
ringlet1
}
Required
No static ringlet selection
entry is created by default.
Caution:
Static ringlet selection entries take effect only when the RPR ring is closed.
1.5.2 Configuring default ringlet selection
Follow these steps to configure default ringlet selection:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Enter RPR logical
interface view
interface interface-type
interface-number
—
Configure default ringlet
selection
rpr default-rs
{
ringlet0
|
ringlet1
}
Optional
By default, the default
ringlet is Ringlet 0.
Caution:
The default ringlet you configured is not necessarily the one in use. This happens when
a span is faulty and unable to forward data.
1.6 Configuring Rate Limiting
RPR services fall into three classes: class A, class B and class C, with decreasing
priorities.